Cropliner Slimline (HS)
FOR TREES TO 6 METRES HIGH USING THE WORLD-LEADING 920DSV FAN
FEATURES AND OPTIONS
»» 2000 litre tank Slimline tank for high intensity plantings
»» 920mm DSV fan with down-stream straightening vanes for perfect air delivery and reduced horsepower requirement
»» Stainless steel fan shroud – rugged and totally corrosion resistant
»» 2-speed gearbox for fan to allow for varying tree sizes
»» 170 L/min brass pump – totally corrosion resistant
»» 14 brass roll-over nozzle bodies per side to give excellent coverage throughout the tree canopy
»» A choice of controller options from manual to fully automatic spray rate control
»» Fully hot-dipped galvanised chassis with rear bumper
»» Optional 80 litre fresh water flush tank
2000 litre poly tank construction with optional 80 litre flushing tank. 15 litre fresh water tank fitted. Quick release, hinged lid, premix filling basket, sump.
FANS - 820MM AND 920MM DSV
Fieni DSV fan range – adjustable pitch blade, 2-speed gearbox.
The 820 and 920 DSV fans feature modern shaped fan blades made from a glass reinforced nylon polymer. The blade design allows for maximum efficiency and reduced noise.
»» 920 DSV – 28 nozzles (swing-over type)
»» 820 DSV – 28 nozzles (swing-over type)
»» Three pitch settings – 26, 34 and 42 degree – set standard at 34 degrees
»»Noise reduction by up to 10 dB
»» Reduced fuel consumption
»»Heavy duty 2mm 316-grade stainless steel cowling
»»Glass reinforced nylon blades
»» Improved air flow management for maximum performance
»»Up to 37% more air delivery, all with a lower power requirement
»» 2-speed heavy-duty gearbox, 540 RPM input. 1:2,93 ratio low gear, 1:3,92 ratio high gear. Single lever control for gear selection with neutral†
»»Oil sight glass
»» 175mm diameter centrifugal clutch for fan engagement
»» Safety guards in place in air intake and outlet
»»Dual spray ring with 14 rollover nozzles per side
»»Allows the grower to operate with lower hp tractors while achieving greater performance
† Note: all figures are for 920mm DSV fan
High pressure brass head pump – ARBHS170 (max. 50 bar) – large capacity (163 L/min) four diaphragm pump featuring front external bronze manifolds and brass heads to minimise corrosion.
Heavy duty PTO driveshaft comes with safety covers and quick release pins.
Manual remote mounted ARBMH50 controller standard.
»» Electric – high pressure solenoid valves, in-cab control
»»Croplands auto-rate controller
»»HV4000 automatic rate controller and optional data logger
Supa-mix agitation plus bypass.
Full filtration system – tank filling basket, suction filter and optional high pressure brass pressure filters.
Standard fitted with one set of (28) stainless steel disc and core and one set of (28) ALBUZ ceramic hollow cone nozzles.
60º and 80o brown and yellow fitted as standard.
Powder and granular basket. Optional suction probe.
Full length, heavy duty, galvanised chassis, single step, adjustable axle for width, wheel scrapers, adjustable drawbar, jockey wheel, sump guard, rear bumper and leaf guard.
10.0/75 x 15.3” 10 ply tyres.
Empty approximately 640kg.
»» 4.5m L x 1.4m W x 1.4m H (2000/920DSV) (standard)
»» 4.5m L x 1.6m W x 1.4m H (axles extended)
HT-ARBHA140 ARBHA140 alloy pump in lieu of ARBHS170 brass pump,
HT-ARBHS200 200 L/min brass pump in lieu of ARBHS170 brass pump, (note - not suitable for split manifolds)
DRIVE AND HITCH
HT-CV Wide angle constant velocity PTO shaft
HT-SDB1 Self-steer drawbar (must add HT-CV option)
HT-IS4021 Electric left/right 2-section on/off with solenoids, electric pressure adjustment with integrated pressure filter and master switch with dump solenoidHT-HV2400-BRAG2 Croplands auto-rate controller, 2-section using on/off solenoid valves HT-BRAVO180/S Bravo 180S auto-rate controller, 2-section using on/off solenoid valves
HT-HV4000/S HV4000 auto-rate controller with 2-section using on/off solenoid valves
HT-FT 80 litre fesh water flushing tank
HT-PROBE Chemical suction probe
HT-QF2 Quick fill with camlok coupling
B146.504.1070 In-line brass pressure filters (pair)
HT-OSW Organic swing-over nozzle bodies (no non-drip)
HT-SPLIT4SEC 4 section spray ring, comes with swing-over nozzle bodies and one set discs and cores. For auto-rate or electric four section control, please check before ordering as extra cost is involved
HT-HP202G 400 x 15.5” flotation tyres in lieu of standard tyre